Request a Quote
Renishaw probing and metrology in action
Official Renishaw Channel Partner

Precision you can measure. Traceability you can prove.

Shankara Industrial Corporation supplies, installs and services Renishaw metrology and probing systems, Marknstamp part marking machines, SF HAWK Industry 4.0 solutions and AIR-SEIKI mist collection — from our base in Faridabad, Haryana.

Request a Quote Browse the catalogue →
MetrologyRenishaw · Official Channel Partner
MarkingMarknstamp · Reseller
Smart IndustrySF HAWK · AIR-SEIKI · Biometric
700+Customers across India
Principals we represent
RenishawOfficial Channel PartnerMetrology → MarknStampMarking MachinesMarking Solutions → SF HAWKIndustry 4.0 & IoTSmart Industry Solutions → AIR SEIKIOil mist collectionSmart Industry Solutions →
What we supply

Measure it. Mark it. Keep the air clean while you do.

Metrology & Probing

The full Renishaw machine tool range — spindle probes, tool setters, laser calibration, styli and process control software.

  • OMP / RMP touch probes & RENGAGE high-accuracy
  • OTS, RTS, TS27R, NC4+ Blue, TRS2 tool setting
  • XL-80 laser, QC20 ballbar, XM-60, AxiSet
  • Primo pay-as-you-go twin-probe system

View metrology range →

Marking Solutions

Dot peen and laser marking systems from India's original dot peen manufacturer — portable, benchtop, and fully enclosed laser stations.

  • MNSB-53, MNSB-155, MNSB-TC portable markers
  • MNS-TC, MNS-PC, MNS-HTC tabletop machines
  • ECO, Eco-Max, Stallion & Stallion XL lasers
  • VIN, Data Matrix, QR, serial & logo marking

View marking range →

Smart Industry Solutions

Technology that makes the shop floor itself work better — machine connectivity, controlled access, and clean air at the machine.

  • SF HAWK Industry 4.0 — OEE, productivity, quality, maintenance
  • Traceability & auto-correction solutions
  • Biometric EDIT-lock replacement for CNC controls
  • AIR-SEIKI oil mist collectors

View smart industry solutions →

On-site engineering

We don't just ship boxes. We commission the equipment on your machine.

What actually makes a probe earn its keep is correct mounting, receiver wiring, interface selection and macro configuration on your specific control — and verification that the machine underneath it is accurate in the first place.

  • On-site laser calibration with Renishaw XL-80 and XC-80
  • QC20 ballbar circular testing to ISO 230-4
  • Probe retrofitting, interface wiring and macro setup
  • AxiSet Check-Up rotary axis health checks on 4/5-axis machines
  • Stylus alignment, consumables supply and troubleshooting

See all services

Illustrative — swap for site photos
Why buy through Shankara

Principal-backed products, local engineering

Official channel

Genuine Renishaw product as an Official Channel Partner, and Marknstamp machines as an appointed reseller — with principal warranty and support behind them.

One supplier, three lines

Metrology, marking and filtration on one PO, from one team that understands how the three interact on a live shop floor.

Field engineering

Installation, retrofit, calibration and commissioning carried out at your plant, on your machines, around your production schedule.

Local to Delhi NCR

Based in Faridabad, inside the NCR manufacturing belt — short response times when a line is down.

Popular with job shops

Where most shops start

Primo twin-probe system

Renishaw's entry route into probing: a Radio Part Setter and Radio 3D Tool Setter on a pay-as-you-go Credit Token model, with GoProbe single-line-command software and Total Protect accidental damage cover.

QC20 ballbar

The cheapest, fastest way to find out what your machine is actually doing — a circular test that exposes backlash, servo mismatch, squareness and reversal spikes in minutes.

MNSB-53 portable marker

A 2.5 kg handheld battery dot peen marker with a 50 × 30 mm window and nine force settings — the low-commitment start to permanent part traceability.

Not sure which probe, marker or collector fits your machine?

Tell us the machine, the control and the part. We'll come back with a specification and a price.

Talk to an engineer
Metrology · Official Renishaw Channel Partner

Metrology, probing and machine calibration.

The Renishaw machine tool range, supplied and commissioned in India by Shankara Industrial Corporation as an Official Channel Partner. Spindle probes, tool setters, calibration lasers, process control software and precision styli.

Selecting a system? Probe choice depends on machine size, transmission line-of-sight, spindle interface and control type — and the interface you pick determines how many devices you can run. Send us your machine make, model and control and we'll specify the complete kit, including shank, interface and software.

Renishaw® and associated product names are registered trademarks of Renishaw plc. Shankara Industrial Corporation is an independent reseller of genuine Renishaw metrology and probing systems. Use of the Renishaw name and logo is solely for product identification and compatibility reference.

Need a Renishaw quotation?

Genuine product, specified for your machine, installed and commissioned on site.

Request a Quote
Marking Solutions · Dot peen, laser marking & laser cleaning

Direct part marking that lasts the life of the part.

Industrial marking and cleaning solutions — Marknstamp dot peen and laser systems, plus Shankara UV, fiber and CO₂ laser marking machines and pulsed laser cleaning. Portable, tabletop and production-ready configurations are available.

Choosing a marking method

Quick guide

Dot peen deforms the surface with a carbide or EM-driven stylus — deep, durable, tolerant of rough and coated surfaces. Laser modifies the surface without contact — faster, finer, and better for high-contrast codes on finished parts.

Your situationMethodTypical Marknstamp system
Part is too big or heavy to movePortable dot peenMNSB-53, MNSB-155, MNSBP-145, Deep Marking Machine
Small parts, repeatable placementTabletop dot peenMNS-TC, MNS-HTC, MNS-PC
Deep marks through scale or coatingPneumatic vibropeenDeep Marking Machine (to ~1 mm on soft steel)
High-speed codes on finished metalFiber / MOPA laserECO, Eco-Max, Stallion
Polymers, glass, non-metalsCO₂ or UV laserAny station with 30 W CO₂ or 5 W UV source
Marking inside an automated lineIntegrated headIntegration Heads + CN03/CN07 controller

What Marknstamp machines mark

Capabilities

VIN & chassis numbers

Statutory vehicle identification marking on chassis and engine components.

2D Data Matrix & QR

Machine-readable codes for part tracking and full lifecycle traceability.

Serial, batch & date codes

Part numbers, lot numbers, date codes and expiry marking for compliance.

Logos & graphics

Branding and alphanumerics in straight, angled or circular layouts.

Materials: steel, stainless, aluminium, titanium and other alloys, plus plastics, composites, ceramics, glass, coated surfaces, leather and wood depending on method and source.

On specifications. Figures above are Marknstamp's published specifications. Marking depth, cycle time and achievable code size vary with material, surface condition and stylus or laser source selected — we'll confirm against a sample part before you order.

Mark n Stamp® and its product marks are the property of their respective owners. Displayed machines, specifications, and logos are shown strictly for informational and reselling identification purposes without implying direct corporate affiliation.

Send us a sample part

We'll recommend the method, the machine and the fixture — and show you the mark before you commit.

Arrange a marking trial
Smart Industry Solutions

Technology that makes the shop floor itself work better.

Beyond measuring and marking the part, there is the shop floor it is made on — how much of the day the machines actually cut, who is allowed to change a program, and what the operators are breathing. Three solutions, three problems that don't show up on a drawing.

01 Industry 4.0 · SF HAWK

You cannot improve what you never measured.

Most shops estimate their machine utilisation, and most estimates are generous. SF HAWK is a Pune-based Indian company providing IoT solutions for the machine shop — connecting your CNC machines so that OEE, productivity, quality and maintenance stop being opinions and become numbers.

  • Industry 4.0 Solutions — machine connectivity and live shop floor visibility
  • Traceability Solutions — a record of what was made, when, and on which machine
  • Auto-Correction Solutions — closing the loop between measurement and the machine

Discuss a shop floor rollout

SF HAWK shop floor terminal and dashboard

SF HAWK shop floor terminal and browser dashboard.

OEEAvailability, performance and quality combined into one number you can act on.
ProductivityReal machine utilisation and output, per shift and per machine.
QualityRejection and rework captured against the job that produced it.
MaintenanceBreakdowns and downtime logged, so patterns become visible.
Where this pays. A shop running eight machines at an assumed 80% utilisation that turns out to be 55% is losing the equivalent of two machines. Measuring it is the cheapest capacity you will ever buy — no new machine, no new operator.
Biometric access devices for machine tools

Fingerprint, face and card authentication units.

02 Biometric Systems for Machine Tools

Replace the EDIT lock key with a fingerprint.

Every CNC machine has an EDIT keyswitch, and on most shop floors that key lives in a drawer, on a hook, or in three people's pockets. Anyone holding it can change a program or a parameter, and nothing records that they did. We convert the EDIT lock key on CNC machine tools to biometric authentication.

  • Fingerprint — the operator's own credential, which cannot be lent out
  • Face — hands-free authentication for gloved or oily hands
  • Card — RFID for shops that already issue ID cards

What it changes

The case for it

No more shared key

Access belongs to a person, not to a piece of metal that can be copied, lent or lost.

Accountability

When a proven program comes back wrong, the question “who edited this?” has an answer instead of a shrug.

Protected parameters

Machine parameters and offsets stay out of reach of anyone without the rights to change them.

Audit trail

An access record you can show a customer or an auditor asking how you control your processes.

03 AIR SEIKI · Industrial mist filtration

Clean air is back — mist removal at the source.

AIR SEIKI AIR series is an efficient and cost-effective range of industrial mist collectors for machine tools. The systems are designed for oil and emulsion mist, with compact construction, low energy consumption and easy maintenance. The brochure specifies up to 99% filtration efficiency.

  • 99% filtration efficiency
  • Suitable for oil & emulsion applications
  • Low-cost, easy-maintenance construction
  • Low energy consumption and mist removal at source
  • Three-stage filter cassette: wire mesh + 20 PPI foam + 40 PPI foam
AIR SEIKI industrial mist collector AIR SEIKI mist collector

AIR SEIKI AIR Series

Industrial mist collectors

AS AIR5 MIST

Compact mist collector for lower airflow requirements.

  • Air flow: 600 CMH
  • 230 V · 0.42 A
  • Input power: 100 W
  • Speed: 2480 RPM
  • Noise: 70 dB

AS AIR10 MIST

Mid-range unit for machine-tool mist extraction.

  • Air flow: 1100 CMH
  • 230 V · 0.81 A
  • Input power: 190 W
  • Speed: 2450 RPM
  • Noise: 71 dB

AS AIR15 MIST

Higher-capacity mist filtration for demanding applications.

  • Air flow: 1500 CMH
  • 230 V · 1.05 A
  • Input power: 240 W
  • Speed: 2480 RPM
  • Noise: 79 dB

AS AIR20 MIST

Highest airflow model listed in the AIR series brochure.

  • Air flow: 2000 CMH
  • 230 V · 1.20 A
  • Input power: 260 W
  • Speed: 1350 RPM
  • Noise: 64 dB

Applications

Where AIR SEIKI fits

Turning & machining

Turning centres and machining centres using oil or emulsion coolant.

Grinding

Surface grinding and cylindrical grinding applications.

EDM & industrial saws

Mist filtration for electro-discharge machining and industrial sawing processes.

Other processes

Also listed for parts washing and food-processing applications.

Air Seiki® is a registered trademark of its respective owner. All Air Seiki product images, model designations, and logos are used strictly for referential and descriptive purposes by Shankara Industrial Corporation as an independent reseller.

HF Hawk® trademarks, trade names, and logos belong exclusively to their respective proprietor. Shankara Industrial Corporation references these marks solely to identify supplied equipment and technical tooling lines.

Connect a machine, lock a control, clear the air

Tell us how many machines and which controls — we will scope it.

Talk to an engineer
Technical & on-site services

Engineering support at your plant, on your machines.

Calibration, retrofitting, installation and maintenance — carried out on site, around your production schedule.

Machine Tool Calibration

On-site laser calibration and diagnostic testing to establish what your machine is actually capable of — with standards-compliant documentation you can put in front of a customer or auditor.

  • XL-80 laser interferometer with XC-80 environmental compensation
  • QC20 ballbar circular testing, ISO 230-4 / ANSI B5.54 reports
  • Linear, angular, straightness and squareness measurement
  • XR20 rotary axis calibration and verification — high-accuracy testing of rotary tables, lathes and other rotary axes

Retrofitting & Installation

Fitting probing and tool setting to machines that didn't come with it — mechanical mounting through to a proven, running cycle on your control.

  • Probe and tool setter mounting, shank selection
  • Receiver and interface wiring (OMI-2T, RMI-QE, MI 8-4)
  • Macro installation and parameter configuration
  • Operator handover on GoProbe / Inspection Plus cycles

Maintenance & Support

Keeping equipment you've already bought earning its keep — planned checks and reactive support when something stops.

  • Probe inspection and stylus alignment
  • AxiSet Check-Up rotary axis health checks
  • Marking machine and filtration troubleshooting
  • Styli, batteries and consumables supply
Marking support

Marking trials and application engineering

Choosing between dot peen and laser is rarely obvious from a catalogue. Send us a sample part and tell us what the mark has to survive — heat treatment, shot blasting, paint, oil, years in the field — and we'll run a trial before you commit to a machine.

Sample marking trials

We mark your actual part with candidate methods and stylus or laser sources, so you see the real result on the real material.

Code readability verification

Confirming that 2D Data Matrix and QR marks scan reliably after your downstream processes, not just off the machine.

Fixturing & integration

Nameplate clamping, rotary attachments, tilting heads, and integration heads with CN03/CN07 controllers for in-line marking.

How an engagement runs

Straightforward, and on your schedule

STEP 01

Tell us the machine

Machine make and model, control type, the part you're producing, and what you're trying to measure, mark or extract.

STEP 02

We specify

A complete kit — probe, shank, interface, software and cycles — with a price. Not a catalogue and a phone number.

STEP 03

We commission on site

Mounting, wiring, macro setup and a proven running cycle, scheduled around your production.

STEP 04

We keep it running

Calibration intervals, stylus alignment, consumables and troubleshooting when you need it.

Book an on-site calibration

XL-80 laser and QC20 ballbar testing at your plant.

Schedule a visit
About us · Simplifying Innovations

A metrology and traceability partner for Indian manufacturing.

Shankara Industrial Corporation was incorporated in December 2021 in Faridabad, Haryana (NCR) Based. We supply, install and service the equipment that keeps CNC machine shops accurate, their parts traceable, and their working environment clean — for a customer base of more than 700 across India.

How our journey started

Shankara was founded by Krishan Pathak, who spent nine years in the field for Renishaw across North India, working on machine tool probing applications and machine calibration products. The equipment we sell is equipment he spent most of a career commissioning on other people’s shop floors.

He was joined at incorporation by Sandeep Pandey, whose background is in CNC machine tool service and application — previously with Phillips Machine Tools India, handling Haas machines across the North region.

Our focus

Four disciplines, one objective: parts that are right, and provably so.

Accuracy, traceability and clean air are not separate concerns. An oil-fogged enclosure contaminates the very probe optics and laser lenses that verify and mark your parts. We work across all four so nothing falls between suppliers.

  • CNC metrology — measuring what the machine actually produced
  • Machine tool probing — automating setup and in-process inspection
  • Direct part marking — permanent, scannable identification
  • Industry 4.0 & traceability — making machine performance visible
  • Controlled access & clean air — protecting the process and the operator
Illustrative
Our principals

Who we represent, and what that means for you

Renishaw

A global engineering and scientific technology company, and the reference name in machine tool probing and calibration. Shankara is an Official Channel Partner — you get genuine product, current firmware and principal-backed warranty, supplied and commissioned locally.

MarknStamp

A Thane, Maharashtra based brand owned by Stamp'IT Robotai, and India's first manufacturer of dot peen marking machines. Marknstamp reports over 500 machines installed across 40+ countries, with customers including Bharat Forge, BHEL, HAL and Tata Steel. Shankara is an appointed reseller.

SF HAWK

A Pune, Maharashtra based Indian company providing IoT solutions for the machine shop — OEE, productivity, quality and maintenance, plus traceability and auto-correction.

AIR SEIKI

A Delhi based Indian manufacturer of mist collectors for CNC machine tools, designed to mount directly on enclosed turning and machining centres.

Biometric access systems

Fingerprint, face and card authentication converting the EDIT lock keyswitch on CNC machine tools into controlled, accountable access.

Who we work with

Manufacturers who have to prove their work

Automotive & components

VIN and chassis marking, in-process probing on high-volume turned and milled components, and the traceability records that supply chain audits ask for.

Precision job shops

Machine accuracy verification, automated setup on VMC and HMC platforms, and broken tool detection to protect unattended and lights-out running.

Heavy fabrication & forging

Portable battery and pneumatic dot peen marking for large castings, forgings and fabricated structures that can't come to a benchtop machine.

Aerospace & defence

High-accuracy RENGAGE probing, rotary axis verification on 5-axis machines, and permanent serialisation for lifecycle traceability.

Medical devices

Fine UV and MOPA laser marking on instruments and implants, plus UDI marking for regulatory compliance.

Tooling & die shops

Tool setting, thermal growth compensation and machine calibration where a single scrapped block is expensive.

The team

The people who turn up at your plant

Seven people, combining technical, application, sales and operational experience for Indian manufacturing.

Krishan PathakTechnical Director14 years in machine tools. Ex-Renishaw — probing applications and machine calibration across North India.
Sandeep PandeyExecutive General Manager8 years in machine tools. Ex-Haas, via Phillips Machine Tools India, on service and application in the North region.
Sumit TanwarApplication Manager — Calibration & CMM12 years in machine tool calibration and CMM application.
Shivam MauryaApplication Engineer — Probing, Calibration & Marking5 years on machine tool marking machines, probing and calibration.
Deepak PandeyAdmin & Accounts Manager11 years in administration and accounts.
RishuRajGraduate Engineer TraineeGraduate Engineer Trainee supporting technical and application activities.
Yogesh KumarSenior Sales & ApplicationSenior Sales & Application support for industrial customers and solutions.

Based in Faridabad. On your floor when you need us.

Serving the Delhi NCR manufacturing belt and beyond.

Get in touch
Contact

Tell us the machine. We'll tell you the solution.

Send us your machine make and model, control type, and what you're trying to measure, mark or extract — and we'll come back with a specification and a price.

Shankara Industrial Corporation

Service area

Based in Faridabad, Haryana (NCR) — serving the North India manufacturing belt, with a customer base of more than 700 across India.

Send a sample part

For marking enquiries, a physical sample gets you a far better answer than a drawing. We'll mark it and send it back.